Home › Estimators

Estimators

Cost & asset-value estimators

Get a rough idea of what a project might cost, or model the value of keeping an asset properly coated. Every figure here is an illustrative planning estimate — not a quote.

Rough project cost

Project cost estimator

Pick an asset type, enter a few numbers, and get a ballpark budget range. Open the assumptions panel to tune it to your situation.

Pan / basin area (ft²) coated surface area

Substrate condition

Coating direction

Access

Shutdown window required?

Adjust planning assumptions

These are general planning figures, not manufacturer data. Coverage follows the standard coatings relationship (theoretical ft²/gal = 1604 × %volume-solids ÷ DFT in mils). Final specs come from the product technical data sheet, confirmed per project.

Coverage (ft² / unit) practical, after losses

Material ($ / unit) installed cost per gallon

Mobilization ($) setup / staging

Documentation ($) logs + reporting

Rough budget range

$0 – $0

Midpoint ~$0

Estimated material$0

Surface preparation$0

Application labour$0

Mobilization + access$0

Containment + contingency$0

Documentation$0

Est. coating quantity0 units

Get a real quote →

Number of units e.g. rooftop RTUs

Coated area per unit (ft²) cabinet / housing surface

Or total area (ft²) overrides units × area if set

Substrate condition

Access

Adjust planning assumptions

Coverage (ft² / unit) practical, after losses

Material ($ / unit) installed cost per gallon

Mobilization ($) setup / staging

Documentation ($) logs + reporting

Rough budget range

$0 – $0

Midpoint ~$0

Estimated material$0

Surface preparation$0

Application labour$0

Mobilization + access$0

Containment + contingency$0

Documentation$0

Est. coating quantity0 units

Get a real quote →

Linear feet of steel railings / pipe supports / rails

Coated ft² per linear foot surface wrap factor

Or total area (ft²) overrides linear ft if set

Corrosion condition

Access

Adjust planning assumptions

Coverage (ft² / unit) practical, after losses

Material ($ / unit) installed cost per gallon

Mobilization ($) setup / staging

Documentation ($) logs + reporting

Rough budget range

$0 – $0

Midpoint ~$0

Estimated material$0

Surface preparation$0

Application labour$0

Mobilization + access$0

Containment + contingency$0

Documentation$0

Est. coating quantity0 units

Get a real quote →

Floor area (ft²) mechanical / utility room

Floor condition

Add moisture barrier?

Adjust planning assumptions

Coverage (ft² / unit) practical, after losses

Material ($ / unit) installed cost per gallon

Mobilization ($) setup / staging

Documentation ($) logs + reporting

Rough budget range

$0 – $0

Midpoint ~$0

Estimated material$0

Surface preparation$0

Application labour$0

Mobilization + access$0

Containment + contingency$0

Documentation$0

Est. coating quantity0 units

Get a real quote →

Illustrative only — not a quote. These estimates use general industry planning assumptions and do not account for site-specific access, containment, disposal, structural repair, hidden corrosion, or shutdown coordination. Actual pricing requires a site assessment. Product coverage and specification are confirmed from the manufacturer technical data sheet on each project. TSP Coatings does not claim authorized-applicator status for any manufacturer unless separately verified.

Asset value

Energy & replacement-deferral estimators

Corrosion and fouling force heat-transfer equipment to work harder, and rust shortens asset life. These tools illustrate the potential value of keeping assets protected — using your own assumptions.

Enter load as

Cooling capacity (tons) if using tons

kW per ton typical chiller/tower system

Electrical load (kW) if using kW directly

Annual run hours e.g. seasonal ~2500, year-round ~8000

Electricity rate ($/kWh) Ontario commercial blended

Efficiency preserved (%) performance you keep by preventing fouling/corrosion

Illustrative annual value

$0 / yr

from holding designed efficiency

Annual energy cost (this asset)$0

Modelled electrical load0 kW

Illustrative 10-year value$0

Review this asset →

Replacement cost of asset ($) installed replacement

Remaining life if left to corrode (yrs)

Extended life with coating + maintenance (yrs)

Coating + program cost per year ($) annualized

Annualized deferral value

$0 / yr

value of pushing out replacement

Net of program cost$0 / yr

Annualized replacement (no maintenance)$0

Annualized replacement (with program)$0

Simple payback on program—

Build a program →

Illustrative only. TSP Coatings does not guarantee energy savings or a specific asset life. Real results depend on system type, condition, water treatment, load, maintenance, and many factors outside a coating's control. The efficiency-preserved and asset-life figures are your assumptions, shown so you can weigh maintenance against replacement — not a performance claim.

From ballpark to real numbers.

The estimators are a starting point. For an accurate figure, send photos and we'll assess the asset and quote it properly.

Request a Budget Estimate → Send Project Photos